Production of polyethylene pipes with a diameter from 63mm to 630mm
IE "ALTYN BURGUT" started mass production of polyethylene pipes for various purposes due to a number of parameters that are beneficial for each consumer:
IE "ALTYN BURGUT" is a specialized enterprise for the production of polyethylene pipes and fittings for engineering heating and water supply systems.
- Polyethylene pipes are very durable;
- The impossibility of rust or rot;
- Resistance to temperature fluctuations;
- The material does not react with water, respectively, without affecting its taste;
- High performance characteristics (the service life of polypropylene pipes significantly exceeds the corresponding indicator for steel pipes);
- Low weight of products;
Pipes made of high-pressure polyethylene are quite soft, but at the same time extremely elastic material. It is worth paying attention to their chemical structure: the molecules create a very strong crystal lattice with branches of various lengths, the bonds between the molecules are weak, but it is thanks to this that the material has such a high level of elasticity, compressive and tensile strength, resistance to mechanical damage.
High–pressure polyethylene is a three-layer material with reinforcement made of synthetic thread. Most often, pipes made of it are used in structures for supplying technical and drinking water, as well as other liquid media supplied under pressure not exceeding 3 MPa. These pipes can be buried in the ground without special protection, laid in walls and other enclosed structures.
There are pipes made of LDPE and with much larger diameters from 180 millimeters, which are produced exclusively in long straight segments with a length of 5 to 24 meters. This form is very convenient when installing a water supply system in suburban areas, when it is possible to purchase a small pipe of the required length for arranging a summer shower and similar equipment. Now in Russia, all polyethylene pipes are manufactured according to the state standard 18599-2011.
In addition to water supply systems, LDPE pipes are often used as a protective case for power lines, which is an indicator of the reliability and strength of this material. High-pressure polyethylene is resistant to mechanical damage even when installed in walls.
However, most often polyethylene products are used to supply liquid at various distances. The main advantage of this material is that drinking water does not lose its qualities during transportation, the inner surface of the water pipe is not covered with deposits, the outer part does not let any foreign impurities and chemical compounds into the system and does not release them into the transported substance itself.
They are most well suited for cold water supply systems, the arrangement of sewerage networks and the supply of industrial water for greenhouses. High performance properties allow you to install pipes almost anywhere, the main thing is not to forget about the insulation that protects against ultraviolet rays.
The LDPE pipeline system can be easily hidden behind a wall, under a layer of soil, in closed boxes. Maintenance of such a system is very simple, because the smooth inner surface does not allow harmful deposits and debris to accumulate, so the quality of the transported water will always be very high, which is quite difficult to ensure when installing steel, cast iron, aluminum, ceramic and other water pipes.
How to buy polyethylene pipes?
Call us +99365581823 or +993(422) 4-22-00, we will tell you about the availability, cost and delivery time of pipes.
Write an email request info@altynburgut.com we will respond soon. (Do not forget to specify the brand of interest and the required volume in the request).